Sahra PVA Paint

Building Interior Paints

Product Features:

Sahra, based on polyvinyl acetate resin, is one of the most popular choices for interior painting due to its affordability, fast drying time, ease of application, and breathability. It is primarily used for painting the walls and ceilings of residential, office, and educational spaces.

Pars Deco is a Climate Nautral Certified Company

Packaging

Bucket

Coverage

In a single coat, it covers approximately 7 to 10 square meters per kilogram and 10 to 14 square meters per liter.

Weight (kg) / Volume (Lit)

1, 5, 12, 25 kg

Gloss level

Matte

Diluent

Water

Dry Time

At 23°C, surface drying occurs within 6 to 8 hours, and full drying is achieved after 24 hours.

Application Temperature

PVA (Polyvinyl Acetate) paint should be applied when the ambient and surface temperature is between +5°C and +35°C.

Flash Point

Non-flammable

Description

Sahra a paint that is a widely used as a type of architectural paint based on polyvinyl acetate resin, suitable for interior building surfaces such as plaster, cement, concrete, and brick. Once applied, it gives the surface a matte and uniform appearance, and thanks to its breathable properties, it prevents peeling and cracking.

One of the key advantages of PVA paints is their quick and easy application – they can be applied using a brush, roller, or spray system with ease. This paint has very low odor and dries in a short time, making it ideal for high-traffic areas that need to be used shortly after painting.

Features & Benefits:

• Odorless and suitable for enclosed environments

• Fast drying (about 1 to 2 hours)

• Easy to apply with brush, roller, or spray gun

• Suitable for plaster, cement, concrete, and brick surfaces

• High coverage and good at hiding surface imperfections due to its matte finish

• Breathable to prevent peeling

• Affordable and cost-effective

Applications:

• Walls and ceilings in residential homes

• Office and commercial spaces

• Schools and educational institutions

• Budget-friendly renovation and remodeling projects

How to Use:

1. The surface must be clean, dry, and free of dust, grease, and old paint.

2. Remove all contaminants and dust; if cracks are present, repair them using Pars Deco acrylic putty.

3. It is recommended to prime the surface using Pars Deco acrylic primer or multiprimer.

4. Before use, dilute the paint with 10–15% clean water and apply in two coats using a brush, roller, or spray system. Depending on ambient temperature, wait 6 to 8 hours between coats.

5. During and for 24 hours after application, ensure the surface and ambient temperatures do not fall below +5°C.